Cisco Others 642-374  덤프로 Cisco Others 642-374시험을 준비하시면 시험에서 안전하게 패스 하실수 있습니다.  Cisco Others 642-374덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다.  Cisco Others 642-374 덤프를 구입하시면 일년무료 업데이트서비스를 제공해드립니다.또한 시험불합격시 덤프비용 전액을 환불해드립니다.

Cisco Others 642-374덤프문제:

15.The Cisco ASA software image has been erased from flash memory. Which two statements about the
process to recover the Cisco ASA software image are true? (Choose two.)
A. Access to the ROM monitor mode is required.
B. The Cisco ASA appliance must have connectivity to the TFTP server where the Cisco ASA image is
stored through the Management 0/0 interface.
C. The copy tftp flash command is necessary to start the TFTP file transfer.
D. The server command is necessary to set the TFTP server IP address.
E. Cisco ASA password recovery must be enabled.
Answer: A,D
16.Which two Cisco ASA licensing features are correct with Cisco ASA Software Version 8.3 and later?
(Choose two.)
A. Identical licenses are not required on the primary and secondary Cisco ASA appliance.
B. Cisco ASA appliances configured as failover pairs disregard the time-based activation keys.
C. Time-based licenses are stackable in duration but not in capacity.
D. A time-based license completely overrides the permanent license, ignoring all permanently licensed
features until the time-based license is uninstalled.
Answer: A,C
17.For which purpose is the Cisco ASA CLI command aaa authentication match used?
A. Enable authentication for SSH and Telnet connections to the Cisco ASA appliance.
B. Enable authentication for console connections to the Cisco ASA appliance.
C. Enable authentication for connections through the Cisco ASA appliance.
D. Enable authentication for IPsec VPN connections to the Cisco ASA appliance.
E. Enable authentication for SSL VPN connections to the Cisco ASA appliance.
F. Enable authentication for Cisco ASDM connections to the Cisco ASA appliance.
Answer: C

더많은데모보기:http://www.killtest.kr/Others/642-374.asp

제품소개

시험코드：70-656

시험이름：TS:Microsoft Desktop Optimization Pack, Configuring

버전：V5.87

업데이트：2012-04-13

Q & A：75 Q&As

Killtest 70-656 시험덤프개요

TS:Microsoft Desktop Optimization Pack, Configuring 70-656 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

70-656 덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다.

 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 70-656 덤프가 거의 모든 문제와 정답을 맞추었습니다.

여러분은 응시전70-656 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

70-656  시험정보

70-656  시험언어는 영어, 프랑스어, 독일어, 이탈리아어, 일본어, 한국어, 러시아어, 스페인어, 포르투갈어 (브라질), 중국어 (간체)입니다.

70-656  데모

Exam : 70-656
Title :TS:Microsoft Desktop
Optimization Pack,
Configuring
Version : DEMO
 1.You use Advanced Group Policy Management (AGPM) to deploy changes to client computers. A
consultant will useAGPM to audit policy changes made to computers in the finance department
organizational unit (OU). You create a useraccount for the consultant. You need to provide the consultant
with read-only access to Group Policy objects (GPOs) through AGPM. What should you do?
A. Configure the consultants user account to have read access to the finance department OU.
B. Configure the consultants user account to have read access to the Policies folder within the SYSVOL
share.
C. Configure the consultants user account as an AGPM Reviewer.
D. Configure the consultants user account as an AGPM Approver. E. Configure the consultants user
account as anAGPM Editor.
Answer:C
 2. Multiple Choice QuestionIn this type of question, you select the correct
Answer or
Answers from a list of
Answer choices. Click the Reset button to clear all selected
Answers. If an Active Exhibit button is present, click it to explore in asimulated environment until you find
the information that you need. Then click Close Simulation and
Answer thequestion.Notes Note the following consideration when
Answering this type of question: You might need to use the scroll bar to view the entire contents of the
question. You have a single Active Directory Domain Services forest that consists of a single domain. You
install Advanced Group Policy Management (AGPM). You need to provide a user named Marc with the
ability to check out Group Policy objects (GPOs). What should you do?
A. Assign Marcs user account the Editor role.
B. Assign Marcs user account the Reviewer role.
C. Add Marcs user account to the Domain Admins group.
D. Add Marcs user account to the Group Policy Creator Owners group.
Answer:A
 3. Multiple Choice Question In this type of question, you select the correct
Answer or
Answers from a list of
Answer choices. Click the Reset button to clear all selected
Answers. If an Active Exhibit button is present, click it to explore in asimulated environment until you find
the information that you need. Then click Close Simulation and
Answer thequestion. Notes.Note the following consideration when
Answering this type of question:
You might need to use the scroll bar to view the entire contents of the question. You have a single Active
Directory Domain Services forest that consists of a dedicated forest root domain and a child domain. All
accounts for users and for member computers reside in the child domain. Advanced Group Policy
Management (AGPM) will be used for Group Policy objects (GPOs) that are linked to organizational units
(OUs) that contain users and member computers. You are attempting to install AGPM. You receive an
error message that indicates that you do not have the necessary permissions to install AGPM. You need
to use an account that will allow you to successfully install AGPM. In which group must the account be a
member?
A. the Domain Admins group in the forest root domain
B. the Domain Admins group in the child domain
C. the Group Policy Creator Owners group in the forest root domain
D. the Group Policy Creator Owners group in the child domain
Answer:B

더많은 데모보기:http://www.killtest.kr/MCTS/70-656.asp

제품소개

시험코드：70-647

시험이름：Windows Server 2008,Enterprise Administrator

버전：V11.02

업데이트：2012-04-14

Q & A：187 Q&As

Killtest 70-647 시험덤프개요

Windows Server 2008,Enterprise Administrator 70-647 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

70-647 덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다.

 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 70-647 덤프가 거의 모든 문제와 정답을 맞추었습니다.

여러분은 응시전 70-647 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

70-647시험정보

70-647 시험언어는 영어, 프랑스어, 독일어, 이탈리아어, 일본어, 한국어, 러시아어, 스페인어, 포르투갈어 (브라질), 중국어 (간체)  입니다.

70-647데모

Exam : 70-647
Title :Windows Server
2008,Enterprise
Administrator
Version : Demo
1.Your network consists of one Active directory domain. The functional level of the domain is Windows
Server 2008 R2. Your company has three departments named Sales, Marketing, and Engineering. All
users in the domain are in an organizational unit (OU) named AllUsers.
You have three custom applications. You deploy all custom applications by using a Group Policy object
(GPO) named Applnstall.
The Sales department purchases a new application that is only licensed for use by the Sales department.
You need to recommend a solution to simplify the distribution of the new application. The solution must
meet the following requirements:
The application must only be distributed to licensed users.
The amount of administrative effort required to manage the users must remain unaffected.
The three custom applications must be distributed to all existing and new users on the network.
What should you recommend?
A. Create a new child domain for each department and link the AppInstall GPO to each child domain.
Create a new GPO. Link the new GPO to the Sales domain.
B. Create a new child OU for each department. Link the AppInstall GPO to the Marketing OU and the
Engineering OU. Create a new GPO. Link the new GPO to the Sales OU.
C. Create a new group for each department and filter the AppInstall GPO to each group. Create a new
GPO. Link the new GPO to the domain. Filter the new GPO to the Sales group.
D. Create a new group for each department. Filter the AppInstall GPO to the Marketing group and the
Engineering group. Create a new GPO. Link the new GPO to the domain. Filter the new GPO to the Sales
group.
Answer: C
2.Your network contains servers that run Windows Server 2008 R2 and client computers that run
Windows 7.
All network routers support IPsec connections. Client computers and servers use IPsec to connect
through network routers.
You have two servers named Server1 and Server2. Server1 has Active Directory Certificate Services (AD
CS) installed and is configured as a certification authority (CA). Server2 runs Internet Information
Services (IIS).
You need to recommend a certificate solution for the network routers. The solution must meet the
following requirements:
Use the Simple Certificate Enrollment Protocol (SCEP).
Enable the routers to automatically request certificates.
What should you recommend implementing.?
A. certification authority Web enrollment services on Server2
B. Network Device Enrollment Service on Server2
C. Online Responder service on Server1
D. subordinate CA on Server1
Answer: B
3.Your network consists of one Active Directory domain.
Your company uses a firewall to connect to the Internet. Inbound TCP/IP port 443 is allowed on the
firewall.
You have terminal servers on the internal network. You have one server on the internal network that has
Terminal Services Gateway (TS Gateway) deployed. All servers run Windows Server 2008.
You need to recommend a solution that enables remote users to access network resources by using TS
Gateway.
What should you recommend?
A. Change the firewall rules to permit traffic through port 3389 from the Internet.
B. Install the Terminal Services server role with the Terminal Services Web Access (TS Web Access)
services role.
C. Install the Terminal Services server role with the Terminal Services Session Broker (TS Session Broker)
services role.
D. Create a Terminal Services connection authorization policy (TS CAP) and a Terminal Services
resource authorization policy (TS RAP).
Answer: D
4.Your network consists of one Active Directory forest that contains one root domain and 22 child
domains.
All domain controllers run Windows Server 2003. All domain controllers run the DNS Server service and
host Active Directory-integrated zones.
Administrators report that it takes more than one hour to restart the DNS servers.
You need to reduce the time it takes to restart the DNS servers.
What should you do?
A. Upgrade all domain controllers to Windows Server 2008.
B. Upgrade all domain controllers in the root domain to Windows Server 2008, and then set the functional
level for the root domain to Windows Server 2008.
C. Deploy new secondary zones on additional servers in each child domain.
D. Change the Active Directory-integrated DNS zones to standard primary zones.
Answer: A
5.Your network consists of one Active Directory domain. All domain controllers run Windows Server 2008.
You have file servers that run Windows Server 2008. Client computers run Windows Vista and
UNIX-based operating systems. All users have both Active Directory user accounts and UNIX realm user
accounts. Both environments follow identical user naming conventions.
You need to provide the UNIX-based client computers access to the file servers. The solution must meet
the following requirements:
Users must only log on once to access all resources.
No additional client software must be installed on UNIX-based client computers.
What should you do?
A. Create a realm trust so that the Active Directory domain trusts the UNIX realm.
B. Install an Active Directory Federation Services (AD FS) server that runs Windows Server 2008 R2
C. Enable the subsystem for UNIX-based applications on the file servers. Enable a Network File System
(NFS) component on the client computers.
D. Enable the User Name Mapping component and configure simple mapping. Enable a Network File
System (NFS) component on the servers.
Answer: D

6.Your Company has a main office and 10 branch offices.
The network consists of one Active Directory domain. All domain controllers run Windows Server 2008 R2
and are located in the main office.
Each branch office contains one member server. Branch office administrators in each branch office are
assigned the necessary rights to administer only their member servers.
You deploy one read-only domain controller (RODC) in each branch office.
You need to recommend a security solution for the branch office Windows Server 2008 R2 domain
controllers. The solution must meet the following requirements:
Branch office administrators must be granted rights on their local domain controller only.
Branch office administrators must be able to administer the domain controller in their branch office. This
includes changing device drivers and running Windows updates.
What should you recommend?
A. Add each branch office administrator to the Administrators group of the domain.
B. Add each branch office administrator to the local Administrators group of their respective domain
controller.
C. Grant each branch office administrator Full Control permission on their domain controller computer
object in Active Directory.
D. Move each branch office domain controller computer object to a new organizational unit (OU). Grant
each local administrator Full Control permission on the new OU.
Answer: B

더많은 데모보기:http://www.killtest.kr/MCTS/70-647.asp

제품소개

시험코드：COG-706

시험이름：IBM Cognos Financial Statement Reporting Developer

버전：V8.02

업데이트：2012-03-15

Q & A：64 Q&As

IBM Cognos Financial Statement Reporting Developer COG-706 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 COG-706 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

COG-706덤프구매하시면 일년업데이트 무료 서비스 드립니다 또한 시험에 합격못하면 덤프비용 환불해 드립니다

시험정보

시험 문제수 : 60
시험 허용 시간 : 90분
시험필수 통과 점수 : 68%
시험 언어 : 영어

Exam : COG-706
Title :IBM Cognos Financial
Statement Reporting
Developer
Version : Demo

1.The report team finished their first draft of their report and now they would like to send a snapshot of this
report for review. How would a user create a snapshot?
A. Use the “Create Snapshot” icon.
B. Generate the entire report and check the “Save as Snapshot” option.
C. Every time a user saves, FSR will automatically create a new snapshot.
D. Go to Tools > Snapshots, then select the “Save as Snapshot” option.
Answer: B
2.A user created a snapshot of a report. Now they would like to send this snapshot for approval. How
would a user view the snapshot that was created.?
A. Use the “View Snapshot” icon.
B. Go to Tools > Snapshots.
C. Go to Administration > Resources > View Snapshots.
D. Right-click on the Section Pane and select View Snapshots.
Answer: B
3.You have the administrator role and want to give a user special administrative tasks. Which three tasks
can be granted to the user role by the administrator? (Choose three.)
A. Add query to Excel.
B. Modify properties of an object.
C. Create sections for the report.
D. Audit report.
E. Assign tasks to user.
Answer: A, B, D
4.The “Select the custom group to display” dropdown list in the Select Report dialog allows a user to filter
the objects that will display when a report is loaded. How can this be enabled for a user?
A. in the Tools > Report Setup window
B. on the user’s machine, a configuration key will need to be added to the FSR configuration file
C. in the Task Permissions list in the Users table
D. in the Report Summary node of the report
Answer: B
5.An administrator is working on a quarterly report and needs to add the new custom group “Q2/Q3″.
Where can the administrator add this new group?
A. in the “Customized Group” table under Administration > Resources
B. in the Report Summary node of the report
C. in any FSR object of the report, open the “Set Customized Group” icon and add a new group to the list
D. the custom group is added to the workflow for the object
Answer: A
6.A user has certain objects tagged as custom group “Q1″, but they should be tagged as “Q2/Q3″ only.
How can this be resolved?
A. In the Status by Object table in the Report Summary node, highlight the objects and change the group

from “Q1″ to “Q2/Q3″.
B. Select the objects in the Section Pane, right-click, and select “Q2/Q3″.
C. Navigate to each individual object, click on the “Set Customized Group” icon, deselect “Q1″ and select
“Q2/Q3″ from the list.
D. Navigate to each individual object, click on the “Set Customized Group” icon and select “Q2/Q3′ from
the list.
Answer: C
7.What are two functions of a user role? (Choose two.)
A. Generate selected sections.
B. Create a workflow.
C. Work on assigned objects.
D. Create a report.
Answer: A, C
8.A company compiled its 2010 Q2 quarterly report using an OLAP data source and a query variable for
the quarter. They are now performing a rollover from the 2010 Q2 quarterly report to the 2010 Q3
quarterly report. How do you ensure that the OLAP connection for the new Q3 quarterly report will
be updated with data from 2010 Q3?
A. Change the value for the quarter query variable from Q2 to Q3.
B. Update the value of the quarter field in the OLAP connection to Q3.
C. Change the ##S variable for the quarter to Q3.
D. Change the ##R variable for the quarter to Q3.
Answer: A
9.To use a workflow rule, which two variables are required to be set up? (Choose two.)
A. ##WRI
B. ##IRS
C. ##WR
D. ##WS
Answer: C, D
10.A client is loading data from an Excel spreadsheet but is not certain whether to enable the Allow query
variables in the path and sheet name. What do you tell the client?
A. This should never be enabled; it is not a supported function in the current version.
B. This feature will provide a dynamic link to Excel source files during the rollover process.
C. This feature will enable you to link data across reports.
D. This feature needs to be used to be able to load an Excel sheet; if it is not selected, the user will
receive an error when trying to complete the load.
Answer: B

http://www.killtest.kr/IBM-Cognos/COG-706.asp

제품소개

시험코드：000-617

시험이름：IBM Certified System Admin – DB2 10 System Admin for z/OS

버전：V8.02

업데이트：2012-03-15

Q & A：126 Q&As

IBM Certified System Admin – DB2 10 System Admin for z/OS 000-617 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 000-617 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

000-617 덤프구매하시면 일년업데이트 무료 서비스 드립니다 또한 시험에 합격못하면 덤프비용 환불해 드립니다  

시험 정보 :

시험문제수 : 63
시험 허용 시간 : 90분
시험필수 통과 점수 : 60 %
시험 언어 : 영어

데모

Exam : 000-617
Title B2 10 System
Administrator for z/OS
Version : Demo

1.Assume that you have implemented identity propagation and that the distributed user name is ‘MARY’.
You have mapped this user name to the RACF user ID ‘DB2USER1′. Which statement is true?
A. ‘MARY’ is authenticated by RACF.
B. ‘DB2USER1′ must be defined on the remote system.
C. Remote requests execute with the authority of ‘MARY’.
D. Audit records for this transaction contains both RACF user ID ‘DB2USER1′ and the distributed user
‘MARY’.
Answer: D
2.To satisfy a requirement to track and report on the administrative changes made by users with system
DBADM authority, which DB2 catalog table must be modified to enable this requirement.?
A. SYSIBM.SYSDBAUTH
B. SYSIBM.SYSRESAUTH
C. SYSIBM.SYSUSERAUTH
D. SYSIBM.SYSAUDITPOLICIES
Answer: D
3.Which limiting attribute CANNOT be included in the definition of a trusted context?
A. A DB2 SSID.
B. An IPv4 address.
C. An IPv6 address.
D. A secure domain name.
Answer: A
4.In order to separate DB2 security administration duties from DB2 system administration duties, which
step(s) must be performed?
A. Set both SECADM system parameters to an authorization ID and Role.
B. Specify YES to SEPARATE_ SECURITY and set one SYSADM system parameter to an authorization
ID or Role.
C. Specify YES to SEPARATE_ SECURITY and set one SECADM system parameter to an authorization
ID or Role.
D. Specify YES to PROTECT parameter and set one SECADM system parameter to an
authorization ID or Role.
Answer: C
5.DB2 10 enhances the profile table monitoring facility to support the filtering and threshold monitoring for
the number of connections using which categories?
A. All local and DRDA connections.
B. Collection IDs and IP addresses.
C. Role and Authorization Identifiers.
D. Product Identifiers and Package Names.
Answer: C
6.The standard audit trace has limitations. Which statement is true?

A. You can audit the catalog tables.
B. You can audit every access to a table.
C. You can audit all utilities including DSN1…. ones.
D. You can start a specific audit trace at DB2 startup.
Answer: D
7.What is the process to automatically start an audit policy at DB2 startup?
A. Specify DSNZPARM subsystem parameters AUDITST = *
B. Specify DSNZPARM subsystem parameter AUDITST = YES
C. Specify DSNZPARM subsystem parameter TRACSTR = YES
D. UPDATE SYSIBM.SYSAUDITPOLICIES SET DB2START=Y for the row of the audit policy to be auto
started.
Answer: D
8.Which statement describes a DB2 ROLE?
A. A role is a privilege.
B. A role is a USERID.
C. A role is a RACF entity.
D. A role is a database entity.
Answer: D

http://www.killtest.kr/IBMSpecialist/000-617.asp

제품소개

시험코드：000-M198

시험이름：IBM Lotus Notes & Domino Sales Mastery Test v1

버전：V8.02

업데이트：2012-03-15

Q & A：50 Q&As

IBM Lotus Notes & Domino Sales Mastery Test v1 000-M198 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 000-M198 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

  000-M198 덤프구매하시면 일년업데이트 무료 서비스 드립니다 또한 시험에 합격못하면 덤프비용 환불해 드립니다

시험정보:

시험문제수 : 50
시험 허용 시간 : 90
시험필수 통과 점수 : 74%
시험 언어 : 영어

Exam : 000-M198
Title :IBM Lotus Notes & Domino
Sales Mastery Test v1
Version : Demo

1.To which IBM Lotus Notes and Domino offering does the IBM Smart Developer’s Kit enable independent
software vendors to deploy applications?
A. Lotus Notes Hosted Messaging
B. Lotus Live Notes
C. Lotus Foundations
D. Lotus Domino on premise
Answer: C
2.Which functionality does Quickr add to Lotus Notes.?
A. Theability to replace attachments with links to Quickr places
B. Versioningcapabilities for Lotus Notes emails and documents
C. Theability to send compressed versions of team places as attachments
D. Arelational data store for Lotus Domino applications
Answer: A
3.What does Alloy software provide?
A. Intuitiveaccess to the SAP business suite
B. Officeproductivity suite software
C. Onlinemeetings
D. Calendaringand scheduling
Answer: A
4.Which Lotus offering provides a complete infrastructure and collaboration solution and is specifically
targeted for businesses with 5 to 500 employees with limited or no in-house IT resources?
A. Lotus Quickr
B. Lotus Symphony
C. Lotus Foundations Start
D. Lotus Complete
Answer: C
5.Which competitive advantage does Alloy offer that Microsoft’s Duet does not?
A. Synchronizationof the users contacts with the Alloy system
B. isboth a provider and consumer of web services.
C. Additionalextensibility and customization capabilities
D. Canalso be run from a web browser
Answer: C

http://www.killtest.kr/Sales-Mastery/000-M198.asp

제품소개

시험코드：000-539

시험이름：IBM Tivoli Storage Manager V6.2 Administration

버전：V8.02

업데이트：2012-03-15

Q & A：129 Q&As

IBM Tivoli Storage Manager V6.2 Administration 000-539 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 000-539 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

000-539 덤프구매하시면 일년업데이트 무료 서비스 드립니다 또한 시험에 합격못하면 덤프비용 환불해 드립니다

시험정보

시험문제수 : 65
시험 허용 시간 : 75분
시험필수 통과 점수 : 63%
시험 언어 : 영어

데모

Exam : 000-539
Title :IBM Tivoli Storage Manager
V6.2 Administration
Version : Demo

1.Which privilege class is needed to issue administrator commands that only affect specific storage
pools?
A. Restricted Policy privilege
B. Restricted Storage privilege
C. Unrestricted Policy privilege
D. Unrestricted Storage privilege
Answer: B
2.What is the function of the IBM Tivoli Storage Manager V6.2 (TSM) client scheduler.?
A. It enables security for the scheduling service.
B. It enables tasks to be performed automatically.
C. It enables the client to control access to the TSM server.
D. It enables backup scheduling on AIX or Linux clients only.
Answer: B
3.Which privilege class is required to create the Disaster Recovery Plan?
A. System
B. Security
C. Operator
D. Recovery
Answer: A
4.What are two requirements for a properly working Web client? (Choose two.)
A. a supported Web server
B. an administrator with at least node owner authority
C. the client acceptor daemon service dsmcad is set up and running
D. the passwordacces option in the client option file is set to prompt
E. an IBM Tivoli Storage Manager V6.2 server with an extended edition license
Answer: B,C
5.How does an IBM Tivoli Storage Manager V6.2 administrator create a separate place for backing up a
client’s data that must have the most current versions of files for a single server?
A. define a full backup pool
B. define a file device class
C. define an active data pool
D. define a disk storage pool
Answer: C
6.After configuring the monitoring agent for monitoring, which application is used to display the IBM Tivoli
Storage Manager V6.2 near real-time status?
A. IBM Tivoli Integrated Portal
B. IBM Tivoli Enterprise Portal
C. IBM Tivoli Monitoring Center
D. IBM Tivoli Productivity Center

Answer: B
7.What are two optional recovery log types when implementing an IBM Tivoli Storage Manager V6.2
server? (Choose two.)
A. Active log
B. Active log mirror
C. Archive Mirror log
D. Active Fail-over log
E. Archive Fail-over log
Answer: B,E
8.Which configuration file must be edited to enable journal backups in AIX?
A. dsm.opt
B. dsm.sys
C. journal.ini
D. tsmjbbd.ini
Answer: D
9.Which option must be set to perform IBM Tivoli Storage Manager V6.2 database backups to certain
device classes?
A. set dbbackup
B. set dbrecovery
C. set dbdevclass
D. set drmdbbackupexpiredays
Answer: B
10.A network data management protocol (NDMP) network attached storage device must be backed to
IBM Tivoli Storage Manager V6.2 (TSM). Which interfaces are supported to perform this function?
A. TSM Client Scheduler, Backup-Archive command line client, administrative command line client
B. TSM Backup-Archive Web client, NDMP command line client, administrative command line client
C. TSM Backup-Archive Web client, Backup-Archive command line client, administrative command line
client
D. TSM NDMP graphical user interface, Backup-Archive command line client, administrative command
line client
Answer: C
11.What ensures that VMware full and incremental backups do not backup subfile data relating to the
virtual machine node being protected?
A. exclude.subfile *:\..\*
B. vmbacknodelete YES
C. exclude.dir subfile=no
D. include.subfile g:\tsm\vmbackup\…\*
Answer: A

http://www.killtest.kr/CertifiedAdministrator/000-539.asp

제품소개

시험코드：000-562

시험이름：IBM Tivoli Storage Productivity Center V4.2 Implementation

버전：V8.02

업데이트：2012-03-15

Q & A：200 Q&As

IBM Tivoli Storage Productivity Center V4.2 Implementation 000-562 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 000-562 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

000-562 덤프구매하시면 일년업데이트 무료 서비스 드립니다 또한 시험에 합격못하면 덤프비용 환불해 드립니다

시험정보

시험문제수: 67
시험허용 시간 : 75분
시험 필수 통과 점수 : 62%
시험 언어 : 영어

데모

Exam : 000-562
Title :IBM Tivoli Storage
Productivity Center V4.2
Implementation
Version : Demo

1.A customer uses the Configure Wizard device to configure new or existing resources so that data is
collected on the configured group. Which resource can be configured with the wizard?
A. In-band Fabric Agent
B. SAN Volume Controller
C. Storage Resource Agent
D. VMWare VI Data Source
Answer: B
2.What is the full default path for finding log files that give information about the success or failure of the
IBM Tivoli Storage Productivity Center V4.2 (TPC) installation on a 32-bit Windows server.?
A. C:\Program Files\TPC\log
B. C:\Program Files\IBM\data\log
C. C:\Program Files\IBM\TPC\log
D. C:\Program Files\IBM\device\log
Answer: C
3.IBM Tivoli Storage Productivity Center V4.2 (TPC) Server audit logging initiated by the Graphical User
Interface writes to the log file at which location?
A. TPC_installation_directory\IBM\TPC\data\log\AuditTrace.log
B. TPC_installation_directory\IBM\TPC\device\log\AuditTrace.log
C. TPC_installation_directory\IBM\TPC\data\log\auditTPCDataServer.log
D. TPC_installation_directory\IBM\TPC\device\log\auditTPCDeviceServer.log
Answer: A
4.Which task must be completed to fine tune and control which files are scanned during a filesystem scan
and specify exactly which statistical information is gathered?
A. create a custom scan
B. create a custom probe
C. create a custom profile
D. create a custom Storage Resource Agent Group
Answer: C
5.The History Aggregator is enabled by default to run every day at 3:00 a.m. Which two historical data
statistics can be used for trend analysis? (Choose two.)
A. disk removal statistics
B. disk capacity statistics
C. file modification statistics
D. file backup time statistics
E. file type space usage statistics
Answer: B,E
6.A client wants to migrate 100 data and fabric agents into Storage Resource Agents (SRA). In addition to
command line and installation wizard, what other method can be used for the migration?
A. Administrative Services > Configuration > SRA Upgrades

B. Administrative Services > Configuration > SRA Deployments
C. Administrative Services > Configuration > Migrate Data/Fabric Agent
D. Administrative Services > Data Sources > Data/SRA > Migrate Data/Fabric Agent
Answer: C
7.A customer has IBM Tivoli Storage Productivity Center V4.1 (TPC) installed on Windows 2003 with 8GB
of RAM running IBM DB2 V9.5 Fixpack 5 with 10 Data Agents and 5 Fabric Agents. The customer wants
to utilize the Configure Device Wizard on the newest TPC V4.2 code. Which solution will retain their
current configuration and minimize additional setup time?
A. fresh install of DB2
B. upgrade to TPC V4.2
C. upgrade to TPC V4.2 and migrate Data and Fabric Agents
D. fresh install of TPC V4.2 and deploy Storage Resource Agents
Answer: C
8.When including profiles in a scan the desired profiles can be highlighted in the Available Profiles list box
and applied to which two selectable sections? (Choose two.)
A. Files
B. Hosts
C. Directories
D. Filesystems
E. Operating System Types
Answer: C,D
9.In preparing for migration of all IBM Tivoli Storage Productivity Center (TPC) components to the newest
level, the implementing person installed an IBM Tivoli Storage Manager (TSM) Backup/Archive client on
the TPC Server and configured it to run standard file backups of the local filesystems. What is the best
practice backup method for TPC?
A. online backup using TSM API for Databases to save TPC configuration
B. online backup using the built-in TPC Backup Utility which uses the API to send data to a TSM server
C. offline backup of TPC to TSM without pausing any servers to archive the current state of the TPC
Server
D. offline backup of TPC to TSM with stopping the data, the device servers, and the DB2 database prior to
copying the files
Answer: D

http://www.killtest.kr/TivoliSoftware/000-562.asp

시험코드：000-580

시험이름：IBM Case Manager V5.0

버전：V8.02

업데이트：2012-03-15

Q & A：119 Q&As

IBM Case Manager V5.0 000-580 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 000-580 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

000-580 덤프구매하시면 일년업데이트 무료 서비스 드립니다 또한 시험에 합격못하면 덤프비용 환불해 드립니다

시험정보

시험문제수 : 58
시험 허용 시간 : 90
시험필수 통과 점수 : 72%
시험 언어 : 영어

Exam : 000-580
Title :IBM Case Manager V5.0
Version : Demo

1.Which insurance company’s business scenario or challenge is a prime candidate for IBM Case
Manager?
A. A customer requests written details of the policy and additional product descriptions
B. A customer requests an address change as well as a billing cycle change. The customer wants to
transition from bi-annual billing to monthly billing
C. A customer requests a new home content policy to be added to existing policies. Content descriptions,
estimations, deductible options are evaluated
D. A customer requests a last name change. This means a pre-determined list of systems containing
account information need to be updated with the new last
Answer: C
2.Which two components are optional with the IBM Case Manager? (Choose two)
A. IBM Case Analyzer
B. IBM Mashup Center
C. IBM Content Engine
D. IBM WebSphere Process Server
E. IBM Process
Answer: AD
3.When deploying Case Manager in a distributed architecture, which two databases are supported?
(Choose two)
A. Oracle
B. MySQL
C. Sybase
D. IBM DB2
E. Microsoft SQL Server
Answer: AD
4.At a minimum, IBM Case Manager implementations require which IBM FileNet P8 platform components
to be installed?
A. IBM FileNet Content Engine
B. IBM FileNet Content Engine and Workplace XT
C. IBM FileNet Content Engine and Process Engine
D. IBM FileNet Content Engine, Process Engine, and Workplace
Answer: D
5.IBM Case Manager is best suited for what type of process?
A. An informal process which is modeled and partially tracked by the system
B. A formal process where each step and business goal is fully controlled by the system
D. A combination of formal and informal processes where a balance of control and flexibility is achieved
Answer: D
6.Which two items are always part of a case management solution? (Choose two)
A. Content

B. Analytics
C. Database lookups
D. System integrations
E. Process
Answer: AE
7.Which two REST APIs are offered with IBM Case Manager? (Choose two)
A. Content Manager Interoperability Services (CMIS) APIs
B. Case REST APIs
C. Object REST APIs
D. Content REST APIs
E. Analytics REST
Answer: AB
8.Choose two steps below that you would perform when validating the installation of an IBM Case
Manager application into a production environment? (Choose two)
A. Log in to the IBM Case Builder
B. Log in to the Case Manager Client
C. Verify the ICM API deployment was successful by accessing the following link:
http://server:port/P8PE/Health
D. Verify the Content Engine deployment was successful by accessing the following link:
http://server:port/P8CE/Health
E. Verify the ICM API deployment was successful by accessing the following link:
http://server:port:/CaseManager/CASEREST/v1/info
Answer: BE
9.Which statement best describes the key differences between case management and business process
management?
A. Cases tend to be predictable and rely on system control or business rule based control flow
B. Cases may not always involve human participation, while a business process solution always require
human interaction
C. In case management, the business problem is solved by a knowledge worker using tasks that may
have been modeled; in business process management, the business problem is always solved by
following a modeled process
D. The emphasis of case management is on designing a step by step procedure to solve a business
problem; the emphasis of business process management is on designing a flexible solution for knowledge
workers to solve a repeatable problem
Answer: C
10.IBM Case Manager 5.0 is supported on the following directory servers? (Choose two)
A. Novell eDirectory
B. Oracle Directory Server
C. IBM Tivoli Directory Server
D. MS Active Directory Server

http://www.killtest.kr/IBMSpecialist/000-580.asp

제품소개

시험코드：COG-625

시험이름：IBM Cognos 10 BI Data Warehouse Developer Practice Test

버전：V8.02

업데이트：2012-03-15

Q & A：84 Q&As

IBM Cognos 10 BI Data Warehouse Developer Practice Test COG-625 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 COG-625 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

COG-625 덤프구매하시면 일년업데이트 무료 서비스 드립니다 또한 시험에 합격못하면 덤프비용 환불해 드립니다

시험 정보

시험문제수: 84
시험허용 시간 : 90
시험필수 통과 점수 : 78%
시험 언어 : 영어

데모

Exam : COG-625
Title :IBM Cognos 10 BI Data
Warehouse Developer
Practice Test
Version : Demo

8.A developer wants to ensure that the business keys in incoming source data are replaced with surrogate
keys in the fact tables. To do this, what must be modified?
A. Hierarchy properties
B. Template properties
C. Fact build properties
D. Connection properties
Answer: B
9.Some incoming fact data has invalid product codes. The developer wants to accept this fact data and
assign the necessary surrogate keys in the dimension table. What can be done to accomplish this?
A. Accept unmatched member identifiers in the measure element properties.
B. Modify the SQL for the reference structure to exclude the missing product codes.
C. Accept unmatched member identifiers in the dimension element properties and save unmatched
member details via reference structure.
D. Add a derived dimension element to the fact build to store the missing product codes and unsubscribe
the element from the delivery module.
Answer: C
10.When creating dimensions, what is commonly used to track historical changes?
A. Level filters
B. Surrogate keys
C. Output filters
D. Derived dimensions
Answer: B

더많은 데모는  http://www.killtest.kr/IBM-Cognos/COG-625.asp에서 다운받으세요